CyberRidge logo
Product
Technology
What is the threat
Existing solutions
⁠CyberRidge technology explained
Industries
Telecom operatorsSystem integratorsData centersDefenseGovernmentFinancial servicesHealthcareCritical infrastructure
Network Topologies
Resources
NewsWhite papers
BlogNewsFAQ
Company
Contact
Home
Product
Technology
Industries
Telecom operatorsSystem integratorsData centersDefenseGovernmentFinancial servicesHealthcareCritical infrastructure
Network Topologies
Company
Resources
News
White papers
Blog
FAQ
Get in touch

How to Implement Unrecordable High-Speed Optical Transmission for Secure Networks

This article explains how data traversing a fiber link is made unrecordable, how the equipment is installed, and which parts of the network it protects.

Unrecordable optical transmission hides a fiber signal so that an intercepted copy contains no data worth storing. Encryption protects what a recording contains, while scrambling the transmission makes the recording useless. Installation is an overlay, with one matched unit at each end of a link. Carmel, our photonic layer security platform, delivers this protection at 100 -400 Gb/s per link.

‍

Unrecordable high-speed optical transmission is implemented by placing a matched pair of CyberRidge Carmel photonic layer security units at the two ends of a fiber link. Photonic layer security (PLS) protects data on the fiber itself by making the light unrecordable instead of merely hard to read. Each Carmel unit spreads the signal across a wide band of wavelengths and buries it in optical noise, and only the partner Carmel unit can restore it. A 2025 Journal of Lightwave Technology paper, co-authored by our founders, demonstrated this on a 100 Gbps signal over 80 km of standard fiber. The paper demonstrated that no usable data can be captured, so no later quantum or classical attack has anything to process.

‍

Fiber taps and the recorded copy

A fiber tap records traffic by pulling a small share of light out of the cable. Tapping fiber is easy and simple. A small clip-on device bends the cable slightly, which lets a fraction of the light leak out where a photodetector can read it. The cable is not cut and the link keeps running normally, so the operator sees no outage.

‍

The recorded copy is the threat, because it's vulnerable to being decrypted later. Executive Order 14412, signed June 22, 2026, names the same risk of adversaries harvesting data now and decrypting it later. Encryption leaves that copy intact, so protection lasts only until advanced computational abilities can decrypt it. An unrecordable signal changes the outcome of a tap, because the attacker collects noise instead of scrambled data.

‍

How Carmel treats the signal

Each Carmel unit first spreads the signal across 1.5 terahertz of the C-band, a standard range for long-distance fiber. The unit then scrambles the spread signal with optical keys that change every fraction of a second. An air-gapped component generates those keys, and they travel inside the light itself, so nothing stores them. A receiver without the current key sees a wide, featureless band of light.

‍

Carmel then adds optical noise until the signal sits below the noise level on the fiber. Optical signal-to-noise ratio (OSNR) compares signal power with the background noise around it. This negative OSNR ensures the noise carries more volume than the data. A tap on that fiber captures light with no pattern to isolate, so there is nothing to store or process later.

‍

The partner unit reverses the process. It holds the matching optical key at the exact moment the light arrives, removes the spreading, and recovers the original data. Because only that receiver can undo the spreading, intact data exists at the two ends of the link and nowhere in between.

‍

Wondering how photonic layer security differs from optical encryption? What Is Photonic Layer Security, and How Is It Different from Optical Encryption?

‍

What Carmel covers

Carmel protects data in transit on wide-area network links, the long fiber spans that connect sites, cities, and countries. It does not cover local networks inside a building, and it does not protect a compromised server at either end of the link. Laptops, databases, and cloud accounts stay under the controls that already guard them.

‍

Carmel cannot protect traffic that an attacker recorded before installation. That copy stays in the attacker's archive, so protection starts on the installation date. Distance has a stated limit: a link runs up to 100 km without amplification, and standard EDFA and Raman amplifiers extend longer spans. Carmel complements encryption and post-quantum migration instead of replacing them.

‍

Installing Carmel beside existing optical equipment

Carmel installs as an overlay, with one unit at each end of a link and no changes to the existing optical transport equipment. The protected channel shares the C-band with conventional wavelengths, including up to five from other vendors' equipment. We have validated this on carrier links with Raman and EDFA amplification and multi-vendor equipment.

‍

Deployment starts by installing Carmel in parallel with live traffic, with no downtime, and identifying the links that carry the most sensitive data. Testing follows in weeks two and three, when non-critical traffic moves through Carmel and performance is validated. Critical traffic moves over in the fourth week, with the process being monitored throughout.

‍

The table lists the planning facts for a single protected link.

Carmel Feature Scope Security value
Protected Security Infra WAN fiber links between sites Covers traffic where a physical tap can be placed
Line rate 100–400 Gb/s uplink Fits wavelengths in common use
Reach Up to 100 km unamplified; works with EDFA (erbium-doped fiber amplifier) and Raman amplification Supports metro, regional, and amplified spans
Installation Overlay matched pair, with no changes to existing DWDM (dense wavelength division multiplexing) equipment Adds protection without replacing transport gear
Key handling Air-gapped generator, that produces a new optical key every fraction of a second. Keys carried in the light. No stored key exists for an attacker to steal

‍

Read to find out how CyberRidge delivers unrecordable high-speed optical transmission and how it is deployed.

‍

Choosing which links to protect first

Operators should begin with links that carry long-lived secrets across fiber they do not control, such as inter-site and inter-datacenter spans. A phased rollout lets one link prove itself before the next follows. As data already harvested by an attacker can be stored indefinitely, the spans with the most time-sensitive data, deserve the earliest installation dates.

‍

Unrecordable transmission means an intercepted signal holds only noise, so a recording made on the fiber gives a later attacker nothing to process. Carmel installs as an overlay, complements encryption and post-quantum migration, and protects wide-area links from the day it is installed. Planning a fiber link that must stay unrecordable? Visit CyberRidge to discuss a deployment.

‍

FAQs

Q: How does Carmel make optical transmission unrecordable?

A: Carmel spreads the signal across a wide band of wavelengths, scrambles it with optical keys that change every fraction of a second, and buries it in optical noise. A tap on the fiber collects noise with no recoverable data. The partner unit holds the matching key and restores the original signal.

‍

Q: How long does it take to deploy Carmel on an existing fiber network?

A: Our deployment plan take just a few weeks. Carmel first runs in parallel with live traffic with no downtime. Non-critical traffic is validated in weeks two and three, and critical traffic moves over in the fourth week.

‍

Q: Does Carmel require replacing existing optical transport equipment?

A: No. Carmel installs as an overlay, with one unit at each end of a link, and works alongside optical equipment from any vendor. It uses a standard 100 gigabit Ethernet client connection, so routers and switches connect as before.

‍

Q: What is the maximum link distance for unrecordable optical transmission with Carmel?

A: A Carmel link runs up to 100 km without amplification. Carmel is compatible with EDFA and Raman amplifiers, so longer spans are possible with standard amplification.

‍

Q: Is unrecordable optical transmission a replacement for encryption or post-quantum cryptography?

A: No. Carmel complements both. Encryption and post-quantum cryptography protect data where it is stored and processed, while Carmel prevents a recording of the signal on the fiber.

‍

Q: Does Carmel protect local networks or data stored on servers?

A: No. Carmel protects data in transit on wide-area fiber links between sites. Local networks, endpoints, and stored data stay under their own controls.

‍

Make your data unrecordable today.

Get in touch
CyberRidge logo
Photonic Layer Security for Data in Transit
Co-funded by the European Union
General
HomeProductTechnologyNetwork TopologiesCompany
Industries
Telecom operatorsSystem integratorsData centersDefenseGovernmentFinancial servicesHealthcareCritical infrastructure
Resources
White papersBlogFAQNewsInsights
Contact
Get in touchcontact@cyber-ridge.comLinkedin
Legal
PrivacyTOCAccessibility statement
CyberRidge 2026. All rights reserved
Site by Streetlight