CyberRidge logo
Product
Technology
What is the threat
Existing solutions
⁠CyberRidge technology explained
Industries
Telecom operatorsSystem integratorsData centersDefenseGovernmentFinancial servicesHealthcareCritical infrastructure
Network Topologies
Resources
NewsWhite papers
BlogNewsFAQ
Company
Contact
Home
Product
Technology
Industries
Telecom operatorsSystem integratorsData centersDefenseGovernmentFinancial servicesHealthcareCritical infrastructure
Network Topologies
Company
Resources
News
White papers
Blog
FAQ
Get in touch

How Can Data Center Operators Protect Interconnect Links From Harvest-Now, Decrypt-Later Attacks?

For data center security leads: Know what crosses your interconnects, its attraction to attackers, and how to protect it on the fiber.
  • Data center interconnects carry replication, backup, AI training data and customer workloads, often over fiber the operator does not control.
  • Harvest-now, decrypt-later attackers record encrypted traffic today and plan to break its key exchange later.
  • Photonic Layer Security protects the link at the physical layer, so a tap captures noise instead of a usable recording.
  • Our Carmel platform applies Photonic Layer Security to links between data centers at 100 - 400 Gb/s, alongside TLS, IPsec and PQC.

‍

Operators protect data center interconnects from harvest-now, decrypt-later attacks by adding physical-layer protection to strong encryption and post-quantum planning. A lot of interconnect traffic crosses leased or carrier fiber, where the operator controls neither the route nor the access to it. An attacker who taps that fiber can record encrypted traffic now and attempt decryption years later. Photonic Layer Security closes that gap by making the signal on the links between data centers unrecordable.

‍

What travels between data centers, and over whose fiber

A data center interconnect is the fiber link joining two or more facilities across a city, region or country. Replication, backup, AI training data and customer workloads all move across these links. The exposure sits on the fiber between sites, and operators often do not control it. Interconnect routes commonly run over leased fiber or carrier wavelengths that pass through shared ducts, manholes, and street cabinets. A tap can bend the cable slightly and draw off a small fraction of the light without breaking the connection. Because the link keeps running, neither site sees an outage that would reveal the tap. This leaked signal is then converted into data bytes, which is stored for later decryption.

‍

Long-lived data and the harvest-now, decrypt-later window

In a joint 2023 factsheet, CISA, NSA and NIST warned that attackers may already be collecting data with a long secrecy lifetime. The agencies call this catch now, break later. AI models, proprietary datasets and customer records fit that profile because they keep their value long after transmission.

‍

Quantum computing threatens the key exchange, not the bulk encryption that protects the data itself. Today, public-key methods such as RSA agree on the session key that AES then uses to encrypt the payload. A capable quantum computer could break that key agreement and expose the AES key captured in the same recording. NIST finalized its first post-quantum standards in August 2024, including FIPS 203 (ML-KEM) to replace vulnerable key exchange.

‍

Post-quantum migration protects traffic sent after the switch, but it cannot reach back to recordings already made. The recording is therefore the step of the attack that is most in need of being blocked. If a tap on the fiber cannot capture a usable signal, there is nothing to store and decrypt later, irrespective of quantum advances.

‍

Do you know how to mitigate the risk of HNDL attacks? Learn how each stage of a harvest-now, decrypt-later attack works and which defenses address it.

‍

Photonic Layer Security: protecting the signal instead of the packet

Photonic Layer Security is a category of protection that works on the light in the fiber, at Layer 1. At Layer 1, data travels as optical signals before any packet exists. Conventional encryption scrambles the content of each packet, yet the encrypted signal can still be copied in full. Photonic Layer Security changes the signal itself so that a copy holds nothing usable.

‍

Our Carmel platform is proprietary technology built on Photonic Layer Security, built for links between sites. Carmel spreads the signal across a wide optical band and then buries it below the noise floor, the background light on any fiber. Only the receiving Carmel unit, holding the matching optical key, can reassemble the signal back to its original form. As our CEO, Prof. Dan Sadot, said at launch, the aim is to “eliminate the ability to record the data in the first place.”

Carmel's optical keys change multiple times per second and travel embedded in the light itself. No long-lived key sits on the link for an attacker to target. 

‍

Where Carmel fits in a data center network

Carmel protects data in transit on the links between data centers, not traffic between racks inside a facility. It complements a PQC migration by ensuring a harvest-resistant layer to controls that protect against digital decryption. For data that must stay confidential for years, this layer of security is crucial. AI models, customer records and IP, for example, must all remain sensitive long after transmission. Carmel’s physical layer encryption keeps them inaccessible, no matter what technological advances the future brings. 

‍

Carmel works alongside TLS, IPsec, and post-quantum cryptography rather than replacing them. Those controls protect each session's content and keys mathematically, while Carmel protects the physical signal on the fiber. Relying on only one leaves either the encryption or the fiber exposed.

‍

This table lists Carmel’s product capabilities and their respective security values:

Capability Carmel detail Value for data center interconnects
Application to security stack Links between data centers (WAN), not traffic inside a facility Protection sits on the fiber operators often do not control
Line rate 100 - 400 Gb/s per protected link Ensures protection for a standard 100 GbE interconnect service
Latency No added latency Replication, storage and AI workloads keep their timing
Signal Spread across a wide optical band and buried below the noise floor A data exfiltration attempt records noise instead of a data signal
Keys Change multiple times per second, carried in the light No long-lived key on the link to target
Network fit Runs over ROADM networks with EDFA and Raman amplification; coexists with adjacent WDM channels Installs as an overlay on existing optical routes. No infrastructure changes are required
Other controls Works beside TLS, IPsec and PQC Adds a physical layer without replacing encryption

‍

Turning protected interconnect into a tenant offering

Protected interconnect gives data center operators a higher-value service tier for tenants with long-lived sensitive data. Finance, government and healthcare tenants hold records that must stay confidential for many years. Protecting the links that carry their traffic at the physical layer gives those tenants a concrete answer for the potential exposure of data moving between sites.

‍

Carmel has already run on live carrier fiber alongside ordinary traffic. Our proof of concept with TIM (Telecom Italia) validated Carmel over more than 200 km of live carrier network in Turin.  DWDM fiber carries many light channels on one strand. Conventional channels shared it throughout the test, so protection needed no dedicated route.

‍

Carmel makes it possible for data center operators to secure the links over fiber they don’t control, while still allowing them to guarantee performance, as protection adds no additional latency. Turn security into a premium service for tenants with long-lived sensitive data.

‍

Planning protection for the links between your data centers? See how Carmel works for data center operators.

‍

FAQs

Q: How can data center operators protect interconnect links from harvest-now, decrypt-later attacks?

A: Operators protect interconnects by combining strong encryption, a post-quantum migration plan and protection at the physical layer of the fiber. Encryption and post-quantum cryptography protect the content and keys of each session. Photonic Layer Security, as implemented in our Carmel platform, makes the signal on the fiber unrecordable. A tap then captures noise instead of traffic that could be decrypted later.

‍

Q: Does physical-layer protection slow down replication or AI workloads?

A: No. Carmel adds no latency to the link, so replication, storage and AI workloads keep their timing. The protection works on the optical signal rather than on packets, so no extra packet processing enters the path. Carmel runs at 100 - 400 Gb/s per protected link.

‍

Q: Can data centers offer protected interconnect as a service to tenants?

A: Yes. Operators can package Carmel-protected links as a higher-value tier for tenants with long-lived sensitive data, such as finance, government and healthcare customers. The protection covers the links between sites that carry those tenants' traffic.

‍

Q: Does photonic layer security replace TLS or post-quantum cryptography?

A: No. Photonic Layer Security adds physical-layer protection beside TLS, IPsec and post-quantum cryptography. Those controls protect session content and keys mathematically, while Carmel protects the signal on the fiber. Operators should keep their post-quantum migration on schedule.

‍

Q: Does photonic layer security work over an existing DWDM network?

A: Yes. Carmel runs over ROADM-based networks with EDFA and Raman amplification and coexists with adjacent WDM channels. It installs as an overlay, with a matched pair of Carmel units at the two ends of the link. Our proof of concept with TIM (Telecom Italia) ran Carmel over more than 200 km of live DWDM fiber beside conventional channels.

‍

Make your data unrecordable today.

Get in touch
CyberRidge logo
Photonic Layer Security for Data in Transit
Co-funded by the European Union
General
HomeProductTechnologyNetwork TopologiesCompany
Industries
Telecom operatorsSystem integratorsData centersDefenseGovernmentFinancial servicesHealthcareCritical infrastructure
Resources
White papersBlogFAQNewsInsights
Contact
Get in touchcontact@cyber-ridge.comLinkedin
Legal
PrivacyTOCAccessibility statement
CyberRidge 2026. All rights reserved
Site by Streetlight